18W 24V DC T8 LED TUBE LIGHT

18W 24V DC T8 LED TUBE LIGHT
Details:
1.The fluorescent fixture must be directly linked to 10–30 V DC power. Disconnect or remove the starter or ballast from the existing fluorescent fixture. Not for residential use with AC 110-220V; only DC 10-30V input voltage is permitted!
2.This 4ft T8 LED tube features a nonpolarity function, so you don't have to worry about which end side is the positive or negative pole. It is designed for 10-30V DC Automotive RV Maritime lighting systems.
3.Save more than 50% on your lighting's electricity consumption compared to fluorescent tubes by using high-quality SMD LEDs that have a 180° beam angle and 1100LM of light output.
4.Wide-range voltage is designed to tolerate power fluctuations in automotive and marine applications. It has a 50,000-hour life expectancy and a high heat dissipation aluminum heat sink.
Send Inquiry
Description
Send Inquiry

 

T8 Florescent Tube dc

 

 

Product Description:

           Features It is used to replace existing Fluoro tubes in Motorhomes and Caravans, people don't want to replace the whole unit as the screw holes never line up properly and the original ones have covers. Take off the old T8 fluorescent tube, then install this led tube light on the bracket fitting. Its a replacement tube only, it has polarity sensitive as there are a number of ways the original fittings are wired up. some are positive one end and negative the other and also vice versa, some are negative and positive at one end and no wires at the other, we take it one step further, to have the driver built inside the tube so the tube can run on 10-30V DC in whatever housing it is put into.

 

Product Features:

1.No threat of high-voltage electrocution

2.LEDs have low power consumption, high intensity

3.White LED life of 50,000+ hrs (color LED life, 100,000+ hrs) continuous burn

4.Major reduction in power costs

5.LEDs produce little or no heat

6.No RF interference

7.No buzzing noise

8.No fluorescent flickering

9.Instant lighting from a cold start

10.Maintenance free

11.No hazard of mercury or lead entering the environment

12.No danger of broken glass

 

Product Specific:

 

Input Voltage(V) DC 10-30V
Luminous Flux(lm) ‎120lm/w 140lm/w 160lm/w
Material Poly Carbonate Lens, Aluminum Base
Light source LED
CCT 3000K/4000/5000/6000K
Power Consumption 2ft - 10W / 3ft - 15W / 4ft - 20W
CRI (Ra>) 80
Lifetime 50000h
LED Chips SMD2835

 

Product Applications:

Recreational vehicle interiors

Bus, shuttle, railcar passenger interiors

Uninterrupted emergency lighting

Focused reading and Task lighting

Interior design uses

Retail store displays

Closet illumination

Cove lighting

Marine recreation applications

Concealed accent lighting

Edge lighting

Under counter lighting

Cubicle, workbench lighting

 

Detailed Images:

4FT DC LED TUBE

led light t8 tube

T8 led tube lights

 

Usage:

 

DC 12V 24V T8 tube

Packing & Delivery:

 

Emergency packing

 

FAQ:

 

Q:Color temperature of these bulbs?

A:5500k cold white,leave me message if you need other color like 4000k or 3200k warm white.

Q:Are these bulbs for outside, and also are any bulbs that they have light 360 all the way around

A:It works well for outdoor sign,but it is not 360 degree.

Q:I have t12 72" fixtures do you have a led replacement for my tubes?

A:Yes we have 6foot long tubes, what end you Need single pin or ovral pin caps.

Q:How log will these last at full lumens? also what is the warranty

A:1000LM and 2 year warranty.

Q:Is this a complete fixture ready to hang or a retrofit for an existing fixture? Very confusing reading comments.

A:It is complete fixture,just hang it to ceiling and plug in and play.

Q:Do you include instructions for converting my fixtures to use the LED bulbs?

A:Yes we put guide in the box of how to install.

 

 

Send Inquiry