Single Cure Nail Flashlight

Core Performance Features 

Dual 365nm+405nm UV+LED dual light source beads, perfectly compatible with every gel nail formula: gel polish, hard builder gel, poly nail extension gel, nail phototherapy glue, rhinestone adhesive glue, no mismatch or incomplete curing issues.

Total 30 high-density lamp beads with curved 3D arched inner cavity layout, uniform light coverage covers entire fingernail, side nail walls and fingertip edges, zero shadow dead zones for full thorough curing.

Ultra-fast curing efficiency: 10s quick dry for color gel polish, 30s regular curing for top coat, 60s deep cure for thick builder/extension gel, 99s low-heat painless mode for sensitive nails and thick layered gel.

Built-in high-precision HD digital LCD display, real-time countdown timer shows remaining curing time clearly, visible battery level indicator with 4 LED power lights to remind charging status.

Intelligent automatic infrared hand sensor: instantly turns on light beads when hands slide into the lamp, auto shut down after timing completes, no repeated manual button operation, energy-saving and user-friendly.

Adjustable 4 timing preset buttons (10S/30S/60S/99S low heat mode) to match different gel thickness and curing demands, one-touch simple operation for beginners and professional technicians.

Large spacious inner cavity, fits full palm of both hands, also accommodates toenail use without squeezing fingers, removable bottom tray for easy foot manicure cleaning and replacement.

Cordless rechargeable design with built-in high-capacity lithium battery, fully wireless operation without power cord restriction, perfect for mobile nail technicians doing home service or outdoor pop-up nail shops.

Constant temperature low-heat light output, avoids overheating burning sensation on nail beds during long-time curing, protects natural nails and skin from excessive heat damage.

Wide voltage universal charging adapter (100-240V AC input), compatible with power grid standards of most countries in Europe, America, Southeast Asia and Oceania, no extra voltage converter needed for cross-border use.

Service Life & Wear & Loss Performance

Long service life of lamp beads: Each imported high-quality UV LED bead supports up to 50,000 hours continuous working lifespan, no frequent bead replacement required, long-term stable luminous efficiency without rapid brightness attenuation.

Slow luminous attenuation loss rate: Adopts high anti-decay chip lamp beads, only less than 5% brightness loss after 20,000 hours of regular daily salon use, maintains consistent curing power for years without obvious curing slowdown.

Battery cycle service life: Built-in premium lithium rechargeable battery supports over 800 full charge-discharge cycles, stable power output without rapid capacity drop, no bulging or aging risk under normal charging rules.

Anti-wear integrated ABS plastic housing: High toughness thickened outer shell, scratch-resistant, anti-drop, anti-collision, effectively resists daily salon bump wear, not easy to crack or deform after long-term frequent carrying.

Low overall machine loss rate: Optimized internal circuit control board with overcharge, over-discharge, over-current protection modules, greatly reduces circuit burnout and machine failure loss caused by improper charging or long-time continuous operation.

Dustproof inner lamp bead structure: Sealed embedded lamp bead design, effectively blocks nail dust, gel residue from entering bead base, prevents short circuit and light bead burnout loss caused by dust accumulation.

Detachable bottom tray reduces cleaning loss: Pull-out magnetic bottom plate collects nail dust and gel residue separately, easy to take out and wipe clean, avoids inner cavity corrosion and light bead pollution loss from long-term residual dirt buildup.

Protection Grade & Safety Protection Specifications

Shell material protection level: High-density industrial ABS flame-retardant plastic housing, reaches IP44 daily dustproof and splash-proof protection grade, resists minor nail water splashes, nail polish liquid spills and fine manicure dust invasion.

Internal circuit multi-layer safety protection system: Integrated overcharging protection, over-discharging protection, overheating protection, short-circuit protection and surge current protection, automatically cuts off power to avoid battery or circuit damage under abnormal status.

UV light anti-leakage curved light barrier design: Arched inner reflective cavity blocks lateral UV light overflow, reduces UV light leakage to user's hand skin, effectively minimizes darkening and aging risks of hand skin from long-term UV exposure.

Insulated charging interface protection: Sealed rubber charging port dust plug, prevents metal contact oxidation and short circuit caused by dust, gel liquid residue, improves long-term charging safety and extends interface service life.

Heat dissipation protection structure: Multi-side hollow heat dissipation holes on the lamp body, rapid heat emission during long-time continuous curing, prevents internal temperature overheating to trigger machine aging and safety hazards.

Low radiation safe light source certification standard: Dual UV/LED beads adopt low-radiation harmless light chips, no harmful UVC short-wave ultraviolet, only safe 365+405nm band for gel curing, meets EU CE, FCC cosmetic equipment safety standards.

Anti-slip bottom anti-fall protection: Non-slip silicone foot pads at lamp bottom, increases friction with desktop surface, prevents the lamp from sliding or tipping over during manicure operation, avoids collision damage to machine and lamp beads.

How To Cooperate With Us?

Thanks to our own facilities, we have complete control over the production process and the quality of our goods, which gives us immense delight. We are committed to giving our clients the finest pricing since we are manufacturers rather than just brokers. We invite clients to evaluate our samples first since we are certain that the cost and quality of our items are transparent. Our dedication to excellence and client happiness motivates us to consistently provide superior products.

 Our address

3rd Floor, 5th Building, Hebei Industrial Park, Hualian Community, Longhua District, Shenzhen, China

 E-mail

bwzm09@ledbenweilighting.com