Product Features :
1.This 55mm cut-out LED downlight has a very limited height of only 45mm.
2. It's available in aluminium colour and it's tiltable for 15°.
3.It's light beam is 60° and is equipped with a LED module of 5W.
4.This has a light intensity of not less than 400 lumen or the equivalent of a halogen spot of 35W.
Specification
- 55mm cut out LED downlight 5W 45mm high :
- Light intensity : 400 lumen
- Wattage: 5W
- Voltage: 90-265V
- Diameter: 68 mm
- Cut-out size: 55 mm
- Height: 45 mm
- Light colour temperature: warm white, normal white or cold white
- Equivalent: LED 5W=35W Incandescent lamp
- Beam: 60°
- Tilt angle : 15°
- Dimmable
- Grey alu or white
Detail Pictures:
Application
Living room, bedroom, kitchen, washroom.
Conference, meeting room, show room, showcase.
School, university, hospital, hotel.
Supermarket, department store, etc.
FAQ
1.What is the typical cutout height for downlights?
A square downlight can range in circumference from 60 to 290mm, among other items. The most popular and widely used models, however, typically have measurements of 93 or 95mm.
2.How can I make my downlight opening smaller?
There are numerous approaches to fixing this issue.
Around the current opening in the roof, make a larger hollow. Fill in that cavity with fresh drywall.
Purchase lamps that will fit the current opening measurement. Some down lamps have a circumference of 90mm.
Purchase some adaptors/reducers from a bulk electrical supplier.
