Led Recessed Light With Night Light

Feature:

● LED array, heat sink, reflector, lens, baffle/trim ring, and ceiling ring are all parts of the module's construction.

● Designed to transport heat away from the LED array is a heat sink

● A uniform source with good efficiency and no pixilation is provided by a mid-power LED array.
● Least 90 CRI, R9 better than 50
● Color accuracy and uniformity are provided by colour accuracy within 3 SDCM at the CCT endpoints and 4 SDCM between ends.
● The adjustable Color Temperature (CCT) ranges from 2700K to 5000K. (factory default 3000K)

Specification:

Description:

led recessed light with night light
Based on the light switch's toggle, select the lighting mode.
While the downlight is turned on and the wall switch is in the "ON" position (nightlight mode), quickly cycle the wall switch between the "OFF" and "ON" positions. The fixture should be set to the nightlight setting.
When the wall switch is cycled from "OFF" to "ON," the fixture will automatically return to downlight mode.
Turn on the downlight by cycling the wall switch to the "ON" position.
To turn off the downlight, flip the wall switch to the "ON" position.
The switch is used by CCT Choose System Models to select between 2700K, 3000K, 3500K, 4000K, and 5000K CCT.

Product Picture:

Installation
May be put in ceilings that are 1/2" to 1-1/4" thick.
Standard round hole saw sizes can be used for the cutout, and a template is given.
Heat-treated springs keep the ceiling fixture firmly in place while preventing light leakage.
For maintenance or replacement, it can be removed from underneath the ceiling.

Installation / Retention
No housing or third-party junction box is needed for the RL-DM.
The remote enclosure could be utilised in close proximity to insulation.
The installer must cut a plasterboard template and install it into the aperture while compressing the clips.
The spring clips will lay on the drywall's reverse side after being released.
Not for use with recessed can installations