comparison of product parameters
| Input Voltage(V) | AC 85-265V | IP Rating | IP65 |
| Lamp Luminous Efficiency(lm/w) | 150 | Application | Sports Stadiums |
| Certification | RoHS, CE | Light Distribution Shape | Wide Flood, 45°, Adjustable, Type IV, type v |
| Lifespan (Hours) | 50000 | Warranty(Year) | 3-Year |
| Color Temperature(CCT) | 6000K (Daylight Alert), 3500K (Warm White), 5000K (Daylight), 4100K (Neutral White), 2700K (Soft Warm White) | Color Rendering Index(Ra) | 95 |
| Installation | Wall Mount, Embedded, Recessed, Surface Mounted | Support Dimmer | Yes |
|
Material |
Aluminum Alloy | Control Method | Remote Control, Touch, Voice, App Control, Light Sensor, Bluetooth |
| Lighting solutions service | Lighting And Circuitry Design, Onsite Metering, Dialux Evo Layout, Litepro Dlx Layout, Auto Cad Layout, Agi32 Layout, Project Installation | Special Feature | Lightweight, High Bright, Plus Size |
| Light Source | LED | Led chip | SMD |
| Beam Angle(°) | 70*150 | Lamp Luminous Flux(lm) | 150000 |
| Place of Origin | Guangdong, China | Product Weight(kg) | 10 |
| Working Temperature(℃) | -40 - 60 | Input Voltage | AC85-265V |
Modular Die-Cast Aluminum Heat Sink Housing Structure
Adopts high-pressure die-cast aluminum alloy lamp body with integrated vertical & horizontal strip heat dissipation grooves; large-area air convection channels maximize heat exchange efficiency and rapidly evacuate heat generated by LED chips.
Thickened aluminum raw material delivers ultra-high structural hardness, resisting impact, bending and deformation under harsh outdoor wind, sand and collision conditions.
Anti-rust electrostatic black spray coating forms a dense protective layer, effectively blocking rainwater, salt fog, industrial acid-base mist oxidation to avoid housing rust and peeling for long-term coastal & factory use.
Independent split module design: each light panel is an individual heat dissipation unit, avoiding heat stacking between multiple modules to control chip junction temperature at low safe levels.
Hollowed-out back bracket structure accelerates air circulation around the lamp body, further lowering internal operating temperature and slowing luminous attenuation.
Lightweight integrated aluminum frame cuts overall lamp weight, reducing load pressure on wall, pole and ceiling mounting surfaces for large-scale high-pole lighting projects.
High-Efficiency High-Brightness SMD LED Chip Light Source System
Equipped with premium high-end high-power SMD LED chips, featuring high luminous efficacy up to 130–150lm/W, far exceeding traditional halogen and metal halide floodlights to achieve superior brightness with lower power consumption.
Scientific uniform matrix layout of LED beads eliminates local dark zones, central bright spots and uneven light distribution, realizing full-area consistent soft illumination without glare.
Custom optical convex lens matched for each chip unit, offering multiple optional beam angles (15°/30°/60°/90°/120°) to meet targeted spotlighting and wide-area flood lighting demands for tunnels, stadiums and yards.
Low heat generation chip architecture reduces thermal stress on the light source; paired with constant-current isolated driver to stabilize output current, preventing brightness flicker caused by grid voltage fluctuations.
High CRI＞80 color rendering index, accurately restoring object true color, suitable for road monitoring, stadium competition lighting and factory inspection lighting scenarios.
Flexible modular power collocation: freely combine 1/2/3/4/5/8 light modules to customize total power from 50W up to 400W, covering small passageways to super-large open venues.
Ultra-Long Service Lifespan & Ultra-Low Luminous Attenuation Performance
Rated nominal service lifespan reaches 50,000 continuous working hours under standard -40℃~+55℃ outdoor ambient temperature, 5–6 times longer than traditional HID flood lights (8,000–10,000hrs average lifespan).
Optimized multi-module split heat dissipation system eliminates concentrated hot spots; only ≤8% lumen loss after 30,000 hours of non-stop lighting, maximum ≤18% luminous decay at full 50,000-hour service cycle.
Each independent module separates heat conduction, avoiding mutual temperature interference between light panels that accelerates chip aging in integrated single-piece floodlights.
Built-in multi-protection constant-current driver with overheat, overvoltage, surge, short-circuit and overload protection circuits; automatically cuts power for cooling when internal temperature exceeds safety threshold to slow luminous loss and extend whole lamp service life.
No fragile filament, glass or mercury components inside; shock, vibration and lightning surge resistant, adapting to bumpy construction sites, windy highway tunnels and frequent vibration stadium environments.
Drastically cuts long-term maintenance labor and spare part replacement costs for large lighting projects; single faulty module can be replaced separately without swapping the entire lamp body.
How To Cooperate With Us?
Having its own factory gives our firm complete control over the production process and the quality of our goods, which we take great pride in. We are manufacturers, not only brokers, committed to offering our clients the lowest costs. We invite consumers to evaluate our samples first since we are certain that the cost and quality of our items are evident. Our dedication to excellence and client happiness motivates us to consistently provide superior products.
Our address
3rd Floor, 5th Building, Hebei Industrial Park, Hualian Community, Longhua District, Shenzhen, China
