comparison of product parameters
| Input Voltage(V) | AC85-265V | IP Rating | IP66 |
| Lamp Luminous Efficiency(lm/w) | 100 | Application | parking lot,garden,sports stadiums,square or other outdoor place |
| Warranty(Year) | 2-Year | Color Temperature(CCT) | 3500K~ 6000K |
| Color Rendering Index(Ra) | 80 | Support Dimmer | No |
| Material | Die-cast Aluminum+Toughened glass | Lighting solutions service | Lighting And Circuitry Design, Onsite Metering, Dialux Evo Layout, Litepro Dlx Layout, Auto Cad Layout, Agi32 Layout, Project Installation |
| Light Source | LED | Beam Angle(°) | 120 |
| Lamp Luminous Flux(lm) | 100-110lm/w | Place of Origin | Guangdong, China |
| Product Weight(kg) | 0.89 | Working Temperature(℃) | -40 - 60 |
| Product Name | Led Flood Light | Color Temperature(CCT) | 3500K~ 6000K |
| Power | 50W 100W 200W 300W 400W 600W | Material | Die-cast Aluminum+Toughened glass |
| LED Light Source | SMD 2835 | Power Factor | PF>0.9 |
| Voltage | AC85-265V | Usage | Ourdoor Lighting |
Core Light Source & Luminous Performance
Equipped with premium SMD 2835 high-performance LED chips, each bead undergoes strict sorting to guarantee consistent color temperature and luminous uniformity across the entire light panel, eliminating dark spots and uneven illumination.
Industry-leading luminous efficacy reaching 100–110lm per watt, far surpassing conventional floodlights; 120° ultra-wide beam angle maximizes coverage range with no dark dead zones for large-area lighting.
Ultra-low light decay design: Adopts constant-current isolated drive power supply matched with efficient heat sink system, restricting lumen depreciation to less than 15% after 20,000 hours of continuous operation, effectively avoiding premature brightness fading.
Modular light board layout disperses heat evenly for every single LED bead, preventing local overheating-induced chip burnout and long-term brightness loss.
High color rendering index option available, restores true object color for stadium, building facade and villa decorative lighting scenarios.
Service Lifespan & Anti-Consumption Structure
Rated ultra-long service life of over 20,000 working hours under normal operating conditions, 5x longer than traditional halogen flood lamps and 3x longer than old-generation COB flood lights.
Die-cast aluminum integrated convection heat dissipation structure with layered ribbed heat sink, rapidly exporting heat generated by LED chips to reduce internal cavity operating temperature, slowing component aging and extending the whole lamp's service cycle.
Fully isolated constant current driver with overvoltage, overcurrent and short-circuit protection modules, avoiding instantaneous voltage surges to burn out light sources and power units, lowering maintenance and replacement loss cost.
Reinforced explosion-proof tempered front glass with strong impact resistance, anti-scratch and anti-crack performance; no frequent glass replacement caused by outdoor collision damage.
Thickened metal mounting bracket and anti-rust hardware screws resist oxidation and corrosion outdoors, no loose mounting failure within the full service lifespan.
Premium Protection Grade & All-Weather Environmental Resistance
Official IP66 dustproof & waterproof rating: Fully sealed whole lamp structure blocks fine dust intrusion completely, and withstands powerful high-pressure water jet flushing from all directions, no water penetration risk in heavy rainstorms.
Washer-sealed waterproof cable gland for wire outlet, fully anti-creeping and waterproof, eliminates hidden danger of water seepage at wiring position which is the common failure point of inferior flood lights.
Wide temperature adaptive design: Stable operation under high-temperature summer sunlight exposure and freezing snowy winter conditions, with both heat resistance and frost resistance performance.
Anti-corrosion surface spraying treatment on aluminum housing, resists acid rain, sea salt fog and outdoor ultraviolet radiation, no shell fading, peeling or rust after years of outdoor use.
Dust-proof fully enclosed light cavity, prevents dust accumulation on LED beads that would reduce light output over time, minimizing light efficiency loss from dust coverage.
How To Cooperate With Us?
Having its own factory gives our firm complete control over the production process and the quality of our goods, which we take great pride in. We are manufacturers, not only brokers, committed to offering our clients the lowest costs. We invite consumers to evaluate our samples first since we are certain that the cost and quality of our items are evident. Our dedication to excellence and client happiness motivates us to consistently provide superior products.
Our address
3rd Floor, 5th Building, Hebei Industrial Park, Hualian Community, Longhua District, Shenzhen, China
