comparison of product parameters
| Application | Warehouse | Input Voltage(V) | AC85-265V |
| Lamp Luminous Efficiency(lm/w) | 115 | IP Rating | IP66 |
| Color Temperature(CCT) | 6000K (Daylight Alert) | Lifespan (Hours) | 50000 |
| Warranty(Year) | 2-Year | Color Rendering Index(Ra) | 95 |
| Support Dimmer | No | Control Method | Switch Control |
| Light Source | LED | Led chip | SMD |
| Lamp Body Material | Aluminum | Lighting solutions service | Lighting And Circuitry Design, Project Installation |
| Place of Origin | Guangdong, China | Lamp Luminous Flux(lm) | 2400-12000 |
| Working Temperature(℃) | -40-40 | Item Type | Grow Lights |
| Material | Aluminum + PC | Working Time (hours) | 50000 |
| Working Lifetime(Hour) | 50000 | CRI (Ra>) | 85 |
Outstanding Core Optical & Luminous Performance
High-efficiency 2835 SMD LED light beads with a high luminous effectiveness of up to 130–150 LM/W are used to minimise shadow dead angles and dark areas in high-ceiling environments by producing uniform, flicker-free, high-CRI neutral white/cool white light.
Customisable beam angles (60°, 90°, and 120°) to accommodate varying ceiling heights and lighting needs, multi-angle integrated convex lens optical design maximises light utilisation rate without light waste.
Long-hour factory workers' working sight is significantly improved by the low glare anti-dazzle optical structure, lack of blue light danger, and compliance with international industrial lighting eye-protection regulations.
No flickering during repeated switch cycles, instantaneous full brightness starting without preheating delay, compatibility with 0–10V dimming, motion sensor, and daylight harvesting control systems for intelligent energy management.
Stable light output against grid voltage fluctuations, broad universal voltage input range AC85-265V, and compatibility with international power supply standards without additional transformers.
Superior Heat Dissipation System
Revolutionary 3D stereoscopic heat flow channel radiator structure made of die-cast aviation aluminum alloy, forming three-dimensional air convection circulation to rapidly export internal heat.
Multi-layer vertical fin & radial fan-shaped heat sink double heat dissipation structure on lamp body, ultra-large heat exchange surface area to realize fast heat conduction and air convection cooling.
Seamless tight bonding between LED PCB board and aluminum heat sink with high thermal conductivity silicone grease, greatly reducing thermal resistance to avoid heat accumulation at light source core.
Independent separated heat dissipation cavity for LED light source and power driver, heat generated by chips and driver is dissipated separately to avoid mutual heat interference and temperature superposition.
Continuous efficient heat control keeps internal working temperature under 65°C under full-load operation, fundamentally solving overheating aging problems of LED chips and power supply components.
Full IP65 Waterproof & Dustproof Protection Grade, Robust Environmental Adaptability
Certified IP65 professional industrial protection rating: fully dust-tight structure to block all fine industrial dust, metal powder, flour particles and workshop floating impurities from entering the lamp interior.
Integrated silicone rubber fully sealed waterproof ring on lamp panel junction, resisting splashing water, mist, cleaning high-pressure water flushing and humid workshop environment, no water fog condensation inside the lamp shell.
Die-cast aluminum lamp body with anti-corrosion electrostatic spray coating, anti-rust, anti-oxidation and weak acid/alkali corrosion resistance, applicable to cold storage, food processing plants, chemical semi-finishing workshops and coastal humid warehouses.
Fully isolated driver compartment with independent waterproof seal, power supply core components will not be eroded by moisture, dust or water vapor, eliminating short-circuit safety hazards caused by poor sealing.
All external hardware accessories (lifting suspension ring, fixing screws) are stainless steel anti-rust fittings, long-term use in high-humidity and dusty environments without rust failure, maintaining complete protection performance for years.
How To Cooperate With Us?
Because of our own facilities, we have complete control over the production process and the quality of our goods, which makes us very pleased. We are committed to giving our clients the greatest price since we are manufacturers rather than just brokers. We encourage clients to evaluate our samples first since we are certain that the cost and quality of our items are transparent. Our dedication to excellence and client happiness motivates us to consistently provide superior products.
Our address
3rd Floor, 5th Building, Hebei Industrial Park, Hualian Community, Longhua District, Shenzhen, China
