comparison of product parameters
| Application | Office | Input Voltage(V) |
AC85-265V |
| Tube Length(ft) | 2, 4, 6 | Color Temperature(CCT) | 3000K-6500K |
| Color Rendering Index(Ra) | 80 | IP Rating |
IP20 |
| Lifespan (Hours) | 25000 | Lamp Luminous Efficiency(lm/w) | 100 |
| Warranty(Year) |
2-Year |
Model Number |
T8 |
| Support Dimmer | No |
Lamp Body Material |
Aluminum+PC |
|
Lighting solutions service |
Lighting And Circuitry Design |
Warranty(Years) |
2 |
|
Place of Origin |
China |
Brand Name |
Benwei |
|
Product Weight(kg) |
0.69 |
Working Temperature(℃) |
-20 - 45 |
| Application |
Indoor Lighting |
Product Name |
T8 LED Tube Light |
| Power |
9/18/36/40W |
Material | Aluminum |
Electronic Driver & Circuit Performance
Light flickering and stroboscopic problems are eliminated by the integrated professional IC constant current driver, which effectively shields human eyes from visual fatigue during prolonged exposure.
Stable lighting performance in erratic grid voltage situations, universal broad voltage input range of 85V–265V AC, and compatibility with international market power supply standards
Single-end or double-end power input is an optional dual power supply method that works with the majority of current fluorescent bulb brackets without requiring complex wiring modifications.
In order to prevent lamp burnout and safety risks, integrated over-current, over-voltage, and short-circuit protection circuits immediately switch off power under abnormal circuit condition.
The tube light's total energy-saving rate is further increased by its low power loss driver solution, power conversion efficiency of over 88%, and reduced energy waste as heat.
Housing Structure & Heat Dissipation Performance
The main body of an aerospace-grade integrated aluminium alloy heat sink has a high thermal conductivity coefficient and rapidly transfers heat produced by LED chips externally to prevent light deterioration brought on by high temperatures.
To speed up air convection cooling, a semi-circular aluminium extrusion profile with a thick heat-dissipating texture on the surface increases the heat-dissipation contact area.
Aluminium heat sink and removable PC diffuser cover make up the separate dual-structure design, which is simple to disassemble for internal component replacement and maintenance.
Strong frosted/clear PC light cover that is resistant to long-term UV radiation without attenuating light transmission, anti-yellowing, and anti-aging
Superior insulated PC lamp caps with exceptional insulation performance, anti-breakage and anti-oxidation properties, and the choice of G13 and FA8 requirements substantially reduce the danger of electric leaks.
For LED light strips, a rigid PCB aluminium substrate improves heat conduction over regular circuit boards and lowers chip operating temperature to limit the rate of light deterioration.
Service Life & Light Decay Loss Control
It has a long service life of up to 30,000 working hours, which is far longer than the 8,000–10,000 hours that conventional fluorescent tubes may last.
An optimised heat dissipation system successfully reduces light decay by controlling the working temperature of LED chips below 65°C while operating at full load.
Strict light decay test criteria: ≤5% luminous loss after 1,000 hours of continuous illumination; ≤18% luminous loss after 10,000 hours; and ≤30% luminous loss during the whole 30,000-hour rated lifetime
A flicker-free constant current driver prolongs the chip service cycle, lowers the early failure rate, and prevents frequent current impact damage to LED chips.
There is no delicate glass tube construction (aluminum+PC composite housing), which prevents unexpected lamp breaking from vibration or impact, lowers the frequency of replacements, and lowers the cost of long-term maintenance.
Provided with a free replacement for damaged items throughout the two-year official manufacturer's warranty term to allay customers' post-purchase concerns
Protection Grade & Safety Performance
Whole lamp achieves IP40 indoor dust-proof protection grade, effectively blocks fine dust from entering internal circuit and LED components, prevents dust accumulation from causing heat dissipation failure
PC lampshade & aluminum body flame retardant material, anti-flame, high temperature resistant, no open flame combustion under abnormal high temperature
Insulated isolation design between internal driver circuit and aluminum heat sink, excellent electric insulation performance, low leakage current, meets global electrical safety standards
Anti-oxidation copper lamp pin contacts, stable power conduction, no poor contact or sparking caused by long-term oxidation
No mercury, no lead, no harmful ultraviolet radiation inside the lamp, fully RoHS compliant eco-friendly lighting product, zero pollution for waste disposal
Low surface operating temperature of housing, no scald risk even after long-time continuous lighting, safe for schools, hospitals and public areas with high pedestrian flow
How To Cooperate With Us?
Because of our own facilities, we have complete control over the production process and the quality of our goods, which makes us very pleased. We are committed to giving our clients the greatest price since we are manufacturers rather than just brokers. We encourage clients to evaluate our samples first since we are certain that the cost and quality of our items are transparent. Our dedication to excellence and client happiness motivates us to consistently provide superior products.
Our address
3rd Floor, 5th Building, Hebei Industrial Park, Hualian Community, Longhua District, Shenzhen, China
