comparison of product parameters
| Application | Residential | Input Voltage(V) | AC100-277V |
| Color Temperature(CCT) | 2700-6500k | Color Rendering Index(Ra) |
CRI>85 |
| IP Rating | IP67/IP44 | Lifespan (Hours) | 50000 hours |
| Lamp Luminous Efficiency(lm/w) | 160 | Warranty(Year) | 5-Year |
| Model Number | T8 UV purple led tube | Support Dimmer | Yes |
| Lamp Body Material | Alumimum + PC Cover | Lighting solutions service | Lighting And Circuitry Design |
| Warranty(Years) | 5 | Place of Origin | Guangdong, China |
| Brand Name | Benwei | Working Temperature(℃) | -25 - 55 |
| Product Name | UV purple led tube | Voltage | AC100-277V |
| PC Cover | Forested Clear Optional | Beam angle | 120-180degree |
| Material | Aluminum+PC | Keyword | CRI>85 |
| Lumenous | 160lm/w | Usage | Commerical Light |
Core Product Performance Advantages
High-Purity SMD UV LED Light Source & Excellent Lighting Output
Equipped with high-quality UV SMD chips arranged evenly along the full length of the tube, uniform ultraviolet light emission with zero dark zones, no partial light attenuation after long-hour operation.
High luminous transmittance transparent PC lampshade, minimizes UV light loss during transmission, maximizes effective UV radiation coverage for target surfaces.
Stable fixed UV wavelength output, consistent glow effect for decorative stage & KTV scenes; reliable spectrum supply to boost coral and aquatic plant growth in aquariums.
High lumen efficiency design, produces strong, eye-catching purple UV glow with much lower wattage than traditional fluorescent UV tubes, delivering higher effective UV output per watt.
Innovative Series Connectable Integrated Design
Unique end-to-end male & female plug terminal design allows daisy-chain series connection; officially recommended to link maximum 6 tubes at one time without voltage drop or flicker issues.
Integrated fixture all-in-one structure, no extra separate lamp bracket needed, eliminates complicated wiring work, cuts installation accessory cost and labor time greatly.
Standard T8 tube body dimension, compatible with most conventional linear light mounting hardware; two-side wall-mountable end caps with reserved screw holes for flexible ceiling, wall or shelf installation.
Complete plug-and-play power cord accessory matched for each tube, directly plug into mains power socket after series connection, no external driver or transformer required.
Efficient Aluminum Heat Dissipation System
Full-length extruded aluminum alloy back shell acts as integrated heat sink, large heat conduction contact area rapidly conducts internal heat generated by UV LED chips outwards.
Hollow heat convection channel inside the aluminum housing accelerates natural air circulation, avoids heat accumulation inside the tube body.
Low operating temperature keeps UV LED chips working under safe temperature range, prevents chip burnout, color shift and luminous decay caused by overheating.
Low Power Consumption & Energy Saving Performance
Ultra-low power draw compared with traditional mercury UV fluorescent tubes, reduces monthly electricity expenditure by over 65% for long-time daily operation venues like KTVs and entertainment halls.
High-efficiency constant current driver built inside the tube, reduces circuit power loss during energy conversion, avoids energy waste under continuous working status.
Instant full brightness startup without warm-up delay, no power waste during waiting for light stabilization; no frequent power surge when switching on/off the tube.
Wide Compatibility Multi-Scenario Application Performance
Entertainment decoration: Disco halls, KTV private rooms, bar stages, Halloween party venues, neon glow exhibition displays, fluorescent wall painting lighting.
Aquatic cultivation: Marine coral tank, reef aquarium, aquatic plant growth supplementary UV lighting, simulating deep-sea UV environment.
Functional detection: Fluorescent stain inspection, currency anti-counterfeit identification, resin curing, craft glow pigment display, museum artifact UV observation.
Service Lifespan & Ultra-Low Luminous/Energy Loss Performance
Extended Overall Service Lifespan
UV SMD LED chip rated lifespan: Up to 50,000 hours continuous working time, far exceeding traditional fluorescent UV tube lifespan (only 8,000–12,000 hours).
Aluminum heat sink housing structural lifespan: Anti-oxidation extruded aluminum shell maintains stable heat dissipation performance for over 8 years indoor use, no deformation or corrosion.
Transparent PC lampshade service life: Anti-UV aging polycarbonate material, will not turn yellow, crack or fog under long-term ultraviolet radiation exposure, keeps high light transmittance for 6+ years.
Built-in constant current driver lifespan: Capacitors and circuit components with wide temperature resistance, stable operation for 35,000 hours without circuit failure or short circuit.
Minimal Luminous Decay & Light Loss
Anti-light-decay packaging technology for UV LED chips: Luminous attenuation less than 12% after 3 years of daily 8-hour continuous operation, maintains strong UV output for long-term use.
High-purity transparent PC cover with anti-reflection coating, UV light transmittance reaches 93%, greatly cuts light refraction and absorption loss inside the tube.
Sealed chip installation cavity, prevents dust accumulation on UV LED beads that would block light output and cause gradual brightness drop.
Low Energy & Maintenance Loss Control
Intelligent constant current IC circuit reduces standby power loss to below 0.03W when idle, eliminates unnecessary energy waste.
No mercury, no fragile glass tube structure, drastically reduces replacement loss and breakage cost during transportation, installation and daily use.
Long maintenance cycle: No frequent tube replacement needed for commercial venues; integrated one-piece design reduces spare part stock loss for wholesalers and project contractors.
Daisy-chain series connection cuts the number of required power sockets, reduces wiring material loss and circuit layout construction cost for large-area lighting projects.
Ingress Protection Grade & Environmental Adaptability
Standard IP40 Indoor Protection Rating
Dust protection Level 4: Prevents large solid dust particles, lint and debris from entering the internal lamp cavity; avoids dust covering UV chips and reducing light efficiency. Fine floating micro-dust cannot penetrate the sealed end cap and PC cover gaps.
Splash & Liquid Resistance Level 0: Designed exclusively for dry indoor environments, blocks accidental water droplet splashes from daily cleaning and indoor humidity vapor; fully sealed end terminals prevent short circuit caused by moist air condensation inside the tube.
Multi-Indoor Extreme Environment Resistance
Wide operating temperature range: Works stably between -10°C to +45°C, no UV light flicker, chip burnout or driver failure under hot summer indoor temperature or low winter room temperature.
Anti-corrosion housing treatment: Aluminum alloy shell with anti-rust oxidation coating, resists mild volatile chemical vapor in bars, aquariums and art studios, no surface rust or discoloration.
Anti-aging PC lampshade: Resists UV-induced material degradation, will not become brittle or opaque after years of continuous ultraviolet light emission from internal chips.
Impact-resistant structure: Flexible plastic end caps and shatterproof PC cover, withstand minor knocks during installation and daily venue cleaning, not easy to crack compared with glass UV fluorescent tubes.
Sealed Structural Optimization for Stable Protection
Fully enclosed integrated lamp cavity with silicone sealing strips at all splicing gaps, isolates internal electronic components from indoor dust and moist air.
Insulated copper connecting terminals at both ends, covered by thick plastic end caps to prevent accidental electric contact and moisture corrosion of conductive parts.
Closed driver compartment separates circuit boards from UV light and ambient air, avoids circuit aging accelerated by dust and humidity.
How To Cooperate With Us?
Having its own factory gives our firm complete control over the production process and the quality of our goods, which we take great pride in. We are manufacturers, not only brokers, committed to offering our clients the lowest costs. We invite consumers to evaluate our samples first since we are certain that the cost and quality of our items are evident. Our dedication to excellence and client happiness motivates us to consistently provide superior products.
Our address
3rd Floor, 5th Building, Hebei Industrial Park, Hualian Community, Longhua District, Shenzhen, China
