The LKG-60W is a high-performance solar street lamp in the LKG line made for medium-high poles that are 8 to 10 meters high. The core is made up of an 80W monocrystalline silicon solar panel that is very efficient (18% to 20%), a 12.8V/30AH lithium iron phosphate battery, and an SMD 3030 LED light source that is 200LM/W. The battery and processor are in different sections, and the structure is split modular. It supports infrared sensors and time-segment intelligent fading. The lamp is 1318 x 345 x 135 mm and has an IP65 waterproof body that is only 3.7 cm thick. It can be used for city side roads, industrial parks, and other places. The MPPT/PWM dual-mode processor makes the best use of energy, achieving a lighting system that uses no power and lasts a long time.
01
High luminous efficiency output
200LM/W luminous efficacy, 60W power output, 12,000LM luminous flux, covering an area of 80 square meters, with brightness enhanced by 40% compared to traditional 60W sodium lamps.
02
Intelligent Energy-saving System
Infrared sensing + four-level time-limited dimming: When people or vehicles approach, the power instantly reaches 100% (60W). Once they leave, it will automatically adjust according to the preset time period (for example, it will drop to 30% during the night). The overall energy-saving rate is over 60%.
03
High environmental resilience
The MPPT controller increases the charging efficiency on rainy days by 30%. The 12.8V high-voltage battery system supports cold start at -30℃. It has IP65 protection and 4K lightning protection to withstand rain and salt fog. The 6063 aluminum alloy radiator has passed the 240km/h wind tunnel test.
04
Precise Energy Management
An 80W high-power solar panel (1310×340mm) is paired with a 30AH battery, ensuring continuous power supply for 2 days in rainy conditions and throughout the night (12 hours per night).
Detailed parameters
| Solar panel | 18V / 80W Monocrystalline Silicon | Size: 1310×340 mm |
| Battery | Lithium iron phosphate 12.8 V / 30 AH | Supports -30℃ cold start |
| Light effect | 200LM/W | 12,000 lumens of total luminous flux |
| Overall size of the lamp | 1318×345×135mm | |
| Led chip | Philips3030, 250PCS | |
| Controller | MPPT, PWM selectable | |
| Lighting mode | Infrared sensing + segmented time control + intelligent control | |
Application scenario
Municipal main road branch road
Two-way four-lane road (pole height 8-10 meters), with 70°×140° asymmetric light spot achieving 30-meter spacing illumination, uniformity > 0.65, eliminating the zebra pattern.
Port Area Industrial Zone
Port logistics channels, dock operation areas. The streamlined body reduces wind resistance by 30%, and the lightning protection level can be upgraded to 10kV.
Renovation of traditional street lamps
The city's circuit lamp upgrade project features a no-wiring design, which saves 50% of cable costs; it is compatible with Ø60-114mm round rods/U-shaped arms, and there is no welding required for the renovation of old poles.
Off-grid transportation node
Highway service areas and parking lots. The inclination angle of the solar panels can be adjusted by ±15° (latitude range adaptable from 20° to 45°), ensuring the charging efficiency in high-latitude regions during winter.
Product features
The LKG-60W, with its three core competitive advantages of municipal-level light output, all-weather resilience, and intelligent energy management, has become the benchmark choice for medium and high pole road lighting. Its precise ratio of 80W photovoltaic panel to 30AH high-voltage battery ensures high brightness output while reducing the total life cycle cost by 40% (compared to conventional street lamps), making it particularly suitable for low-carbon urban infrastructure and industrial area lighting upgrades.
Optical engineering design
The light-blocking lens limits upward spillage of light to less than 5%. The rectangular light spot precisely matches the road contour. The 93% light transmittance PC lens with UV protection layer reduces insect aggregation.
Minimalist maintenance architecture
The quick-release battery compartment and controller module enable on-site maintenance to be completed in less than 10 minutes; the independent IP65 sealed chamber effectively prevents moisture and dust from entering.
Long-life core components
The lithium iron phosphate battery can be cycled more than 2,000 times (approximately 8 years), with aluminum substrate heat conduction and silicone seal for the light source, and the light attenuation is less than 5% over 50,000 hours.
Smart IoT Expansion
Reserve a 4G module interface (compatible with the remote control platform), and support APP control of lighting strategies, battery level alerts, and fault group management.
About our company
Shenzhen Benwei Lighting Technology Co., Ltd is a well-known company that designs, develops, makes, and sells high-tech goods, including LED lighting products. The plant where we work opened in 2010 and is in Shenzhen.
Our address
3rd Floor, 5th Building, Hebei Industrial Park, Hualian Community, Longhua District, Shenzhen, China
