comparison of product parameters
| Lamp Luminous Efficiency(lm/w) | 170 | Light Source | LED |
| Solar Cell | Mono-Si | IP Rating | IP65 |
| Lifespan (Hours) | 50000 | Warranty(Year) | 3-Year |
| Certification | RoHS, CE | Color Temperature(CCT) | 2700-6500K |
| Color Rendering Index(Ra) | 80 |
Power Supply |
Solar |
| Application | Road | Control Method | Remote Control |
| Lamp Body Material | ABS | Material | ABS Plastic |
| Shade material | Plastic | Lighting solutions service | Lighting And Circuitry Design, Dialux Evo Layout, Auto Cad Layout, Project Installation |
| Input Voltage(V) | DC 6 V | Place of Origin | Guangdong, China |
| Lamp Luminous Flux(lm) | 17000 | Working Temperature(℃) | -20 - 50 |
| Product name | Hight Quality Solar Street Light | Keyword | 600w Solar Street Light |
| Power | 60w/100w/120w/150w/200w/240w/360w/500w/600w | Usage | Street Road Garden Square Highway |
Core Performance Advantages
Monocrystalline Silicon Solar Charging Panel with High Efficiency
When there is enough sunshine, the built-in high conversion rate monocrystalline silicon solar panel can reach full charge in 6–8 hours. On gloomy days, it collects weak dispersed sunlight to provide steady energy storage.
In addition to lowering construction costs and the danger of wind resistance for pole mounting, integrated panel design eliminates the need for separate solar bracket installation.
Extremely Bright SMD LED Light Source
uses high-lumen pure white SMD LED beads; each lamp module has a dense array of high-transmittance LED chips; and the light is distributed uniformly without glare or dark areas.
Wide-angle flood lighting with a high luminous efficiency of up to 130 lm/W covers a greater area of pavement with gentle, aesthetically pleasing illumination.
To accommodate varying road width and brightness requirements, there are many modular power solutions available, including 2-module, 3-module, 4-module, and 5-module light heads.
LiFePO4 Energy Storage Battery with a Large Capacity
A fully charged item can provide continuous illumination for eight to ten hours at maximum brightness overnight thanks to an integrated quality lithium iron phosphate battery with exceptional cycle performance.
Low self-discharge rate, steady discharge performance at very hot and low temperatures, and the ability to hold stored power for three to five rainy days without sunshine.
Intelligent Control System with Multiple Functions
Auto light-sensing switch: no human operation is required; it automatically turns on at dark when ambient light dims and shuts off at dawn when brilliant natural light is present.
Human body motion sensor: automatically increases brightness to full when a car or pedestrian approaches, then dims to low power sleep mode to prolong battery life.
Complete remote control matching, including mode switching, brightness +/- adjustment, ON/OFF switching, and time preset (3H, 6H, and 8H fixed illumination duration).
Additional Type-C backup charging port: prevents illumination failure and enables emergency charging via power bank when prolonged wet weather results in inadequate solar charge.
Plug-and-Play & Zero-Wiring Installation
All-in-one integrated structure that just requires permanent placement on a light pole using a matching metal mounting bracket; no complex wire routing or AC power transformer is needed.
The lamp body may be flexibly rotated to maximise the angle at which solar panels receive sunlight, improving charging efficiency.
Service Lifespan & Low Loss Performance
Extremely Long Service Life (25,000 Hours Rated Working Time)
LED light source lifespan: After three years of continuous operation, visible light attenuation is less than 10% thanks to SMD LED chips' anti-light decay technology and consistent luminous output for 50,000 hours.
After ten years of outdoor exposure, monocrystalline silicon solar panels retain more than 85% of their initial conversion efficiency, and its anti-oxidation surface coating keeps power output from declining.
More than 3000 charge-discharge cycles are supported by LiFePO4 batteries, which significantly exceed lithium-ion batteries. Under routine daily charge-discharge circulation, the battery's useful lifetime approaches 6–8 years.
The high-strength die-cast aluminium casing of the whole lamp has a structural service life of up to ten years and is resistant to corrosion, ageing, and deformation.
Extremely Low Energy and Luminous Loss Design
Low light decay LED chip: moderate brightness decrease rate, industry-leading anti-decay packing technology, and no frequent bulb replacement to save maintenance loss costs.
High energy conversion efficiency: an intelligent power management IC lowers standby power loss to less than 0.05W, and a solar panel turns sunlight into electric energy with little energy loss.
Intelligent power-saving mode: motion-sensor dimmer function reduces power consumption by 60% to 70% when there is no traffic. This efficiently lowers battery power loss and prolongs the lamp's service life.
Sealed energy storage structure: completely enclosed battery compartment prevents energy loss from moisture, dust, or temperature changes, and there is no power storage loss in wet outdoor conditions.
Minimal Maintenance Loss and Cost Reduction
The danger of separate component damage is eliminated by an all-in-one integrated design, and the loss of replacement spare parts is decreased by unified housing.
For long-term outdoor lighting installations, there is no monthly power bill loss and no grid energy use.
For large-scale municipal road projects with a shortage of maintenance personnel, a sturdy anti-damage construction minimises post-installation repair labour and material loss.
Competitive Selling Points
Multiple power size options (2/3/4/5 LED modules) support mixed container order, match small retail and large engineering bulk demand.
Complete accessory kits: matched metal mounting bracket, full-function remote control, operation user manual packed together for one-stop delivery.
Eco-friendly solar-powered design complies with global carbon neutrality policy, meets green infrastructure tender standard for government road projects.
Low total cost of ownership: zero electricity fee, ultra-long service cycle, minimal maintenance input, high cost performance for long-term lighting investment.
Customization support: accept logo printing, packaging customization, parameter adjustment for regional market voltage & sunlight condition demands.
Strict factory quality inspection: every finished lamp undergoes 72-hour continuous aging test, waterproof spraying test and charging-discharging cycle test before shipment to guarantee zero defective rate.
How To Cooperate With Us?
We take great satisfaction in having total control over the manufacturing process and the quality of our products thanks to our own facility. As producers rather than just brokers, we are dedicated to providing our customers with the best prices. Since we are certain that the price and quality of our products are clear, we encourage customers to assess our samples first. Our commitment to quality and customer satisfaction drives us to continuously provide top-notch goods.
Our address
3rd Floor, 5th Building, Hebei Industrial Park, Hualian Community, Longhua District, Shenzhen, China
