Light emitting diodes, or LEDs, are quickly evolving into components that are essential to all types of illumination. You are probably prepared to purchase LED bulbs since you are aware of their advantages, which include up to a 20-fold increase in life, the lowest possible energy usage, and the absence of mercury. We choose our LED light bulbs carefully, according to strict criteria so that we can only provide the finest value at the lowest cost.
Should I switch to LED lighting?
Yes, you should switch to LED lighting if you are fortunate enough to be able to pay the initial costs. Over the last ten years, LED technology has advanced rapidly, making our bulbs the brightest and most dependable LED lights on the market. In order to save money down the road on replacement costs, energy bills, and environmental effects, LED lighting should be seen as a long-term investment.
Which LEDs are best for my home? is our first inquiry, which is then addressed by this. The way your space feels and looks, as well as your preferences, will ultimately decide the solution to this one. There is no clear-cut right or incorrect answer. Prior to beginning to replace your old incandescent light bulbs with LEDs that fit your house, you should consider the following important questions:
Which basis is necessary for me?
As with any light bulb, you must first determine the kind of fitting you want, particularly if you are dealing with already-installed fixtures in your house. For instance, is a screw cap or a GU10 prong lamp base required?
What kind of lightbulb?
Are you trying to find a downlight, spot light, candelabra, or standard bulb? As we said before, there are many different sizes and shapes available, and it all depends on what you want the light to do and appear the best.
What level of brightness is necessary for me?
LEDs are measured in lumens as opposed to watts, like incandescent lights. The majority of bulbs will indicate their equivalent wattage so you can determine which one you need. Comparing the watts to lumens of incandescent light bulbs is now crucial due to the improved light output of LEDs. Lumens are the units of light generated in a bulb; wattage is the unit of energy needed to light a bulb. Here's an approximate comparison between LEDs vs incandescent bulbs:
450 Lumens from a 40-watt incandescent
800 Lumens from a 60-watt incandescent
1600 Lux in a 100-watt incandescent
Using the Cree XPG2 3-up as an example, I will now demonstrate the required wattage for an equivalent lumen output. A straightforward calculation allows us to determine this device's wattage: Forward Voltage (Vf) plus Current (I) in amps equals wattage. I discovered the wattage by using the data from the product page's highlighted specs table.
474 Lumens / 2.94 Watts
762 Lumens at 6.09 Watts
1374 Lumens at 13.95 Watts
Even if these lumens vary somewhat, the stark disparity in wattage is still visible. Since LEDs consume up to 90% less energy, the wattage is much lower. Consider the potential savings on energy and costs in your home. But the most important thing to keep in mind during this entire conversation about brightness is that decreasing wattage has no bearing whatsoever on the quality of light. Quality of light depends only on lumens, thus if the lumens of what you currently have match, you should be set to go with considerably less watts.
Which beam angle is required?
Which beam angle does a bulb need to have, or which angled optic should you use if you're working on your own fixtures? The distribution of the light will depend on the angle. Broad angles provide a gentle, well-dispersed light that is perfect for living spaces. However, when attempting to draw attention to certain areas, such as that recently installed built-in bar or a fresh piece of artwork, you may employ narrow angles and spot lights. A narrow angle's direct beam would aid in drawing greater attention to such regions.
Hue?
LEDs are available in a wide variety of hues and intensities. It depends on the atmosphere or feeling you want each room to have. While bedrooms and living rooms will often utilize a warmer, softer light, restrooms and kitchens are typically decorated with cold whites.
Visit our website to learn more about your choices for LED alternatives for your house and discover some easy methods to replace your incandescent bulbs right now:
LED Replacement Bulbs for Under Cabinet Lighting, Outdoor Flood Lighting, Down Lights, and Fluorescent Tube LED Replacements
Our sales staff is here to assist you in achieving your goals for LEDs in your house. We make it simple for you to do it yourself, so you can quickly search by Color, Lumens, and other parameters. Although the initial cost of LEDs may appear a little costly, when you consider the energy savings and the extended lifetime of these lights, the cost becomes negligible.
