Do You Know the Benefits of COB LED Light?
Utilising COB LED technology on the same board space would double the number of LEDs several times over utilising the outdated SMD and DIP LED technologies.
While maintaining the same light output, COB LED technology may significantly lower the LED array's footprint and energy use.
Regardless of the number of diodes used, COB devices only have 1 circuit and 2 contacts for the whole chip, which simplifies the rest of the LED device. This is another significant distinction between COB and other LED technologies.
Benefits of Chip on Board
1. More compact and brighter
The maximum potential of LED Chips is demonstrated by COB LEDs, which are mounted with multiple small chips and have many more diodes mounted within each chip than SMD and DIP LEDs (most COB LEDs contain nine or more diodes, whereas most SMD LEDs only have three diodes and DIP LEDs only have one diode). The density between the diodes is more compact and occupies less space on the device, but it can emit many times the amount of light source in the same
2. There is more even lighting
It may be used as a floodlight for interior illumination, photography, camera lighting, etc. COB lighting is more consistent and can be utilised as a floodlight.
3. Make the process of turning electricity into light more effective.
Traditional DIP LEDs can only produce 20 to 50 lumens per watt, however COB LEDs can produce up to 100 lumens per watt and create brighter light while using less energy.
4. Effective heat dispersion
The COB light can handle numerous diodes that can be powered by a single circuit design with two connections, which uses fewer operational components and reduces the heat produced by each LED chip. This increases the stability and dependability of the COB light and increases its longevity.
5. Low rate of failure
There is no need for spot welding of individual LED chips since each chip is directly attached on the substrate. The failure rate decreases as the number of solder junctions increases.
The use of COB LED lights
High power LED flood lights may be created using COB LED lamps. It is often found in ports, factories, warehouses, industrial regions, street lights, parking lots, and other locations that demand large-area illumination. It may also be utilised in tiny gadgets like cameras and smart phones.
Of course, another drawback of COB led lights is that they are now only offered in a few number of colours, including blue, green, pink, red, cool white, neutral white, and warm white.
Summarize
Despite the aforementioned flaws, COB continues to play a significant role in LED lighting. Because the duration of the electricity's power supply has traditionally set a limit on the illumination brightness of lights. In general, the brightness of the light determines how much power is needed to operate it and how long it will last. COB lighting, on the other hand, lessens the tension between brightness and power.
