Everything about outdoor wall washer lights you need to know

What is a wall washer light made of leds outside?

A type of outdoor landscape lighting known as an LED wall washer light is used to highlight the shapes of massive buildings and, as the name implies, allows the light to wash the wall like water. Some call it outdoor LED strip lights due to its long strip design. Other light source wall washers are gradually being replaced by LED wall washer light due to LED's energy efficiency, great luminous efficiency, rich colors, and long life. The technical specifications of LED wall washers and LED floodlights are essentially the same. in comparison to LED Both the floodlight's circular design and the LED wall washer's heat dissipation component in the shape of a strip are simpler to use.

Standard Parameter

The most common LED wall washers primarily use 1W high-power LED tubes (each LED tube will have a high-efficiency lens made of PMMA, whose primary purpose is to redistribute the light emitted by the LED tube), showing single-line arrangements (two-line or multi-line arrangements; I classify them as LED floodlights), most of the LED tubes of LED wall washers share a radiator, and their light-emitting angles are typically narrow (about 20 degrees), medium

In-depth Parameter

Projection distance: 5–20 meters, depending on the lens; the farther the projection distance, the narrower the angle.

Lighting angle: floodlight at 6 to 90 degrees

Mirror surface: glass reflective lens, 98–98% light transmission, difficult to fog, and UV radiation resistance

Pure metal makes up the lamp's body. It comes in a variety of possible shapes, including square and long linear wall washer lights. The optional length can also be any number between 300, 500, 600, 1000, 1200, or 1500mm. Height and width are constant (with 1 meter being a standard product).

The impact of a structural waterproof wall washer can achieve IP67, with good waterproof and long-term features. IP protection level: IP65-IP67 (IP68 is the highest). Its performance as a waterproof item won't be impacted by prolonged use.

Additionally, there are numerous shapes for wall washers that you can choose from, including long, round, square, length, and size. These shapes are appropriate for installation in and use with a variety of building kinds. The original master-slave connection control has been modified to accommodate offline or built-in control, and the installation process also supports wireless DMX control. To allow each group of lamp beads to independently configure the luminous effect to accomplish diverse color shaping effects and create entirely unique visual effects for huge buildings, the lamp bead light effect's channel has also been increased from the original 3 channels to 4 to 20 channels.

Specifications for the power supply include DC and AC options. The external power source is typically low-voltage DC24V, DC12V, DC36V, and so on. The built-in power supply is typically externally connected to AC220V (Japan AC110V) mains, etc. According to varied requirements, the voltage varies as well.

Full-color color, vivid color, red, yellow, green, blue, purple, white, and other colors are among the color specifications.

Wall washers are increasingly becoming ultra-thin because they are more practical for high-altitude operations and have lower transportation costs than traditional outdoor wall washer lights.

Managed Way

The embedded microcontroller manages the LED wall wash lights. It can be utilized in modest technical applications without a controller. It is capable of producing dynamic effects including jump changes, color flickers, random flickers, and progressive changes. DMX can also be used to control it. Realize effects like chasing, scanning, and others. Both internal and exterior controls are available for high-power LED wall washers. The internal control has numerous built-in changing modes (up to six) and does not require an external controller, but the external control requires an external control controller in order to produce color changes. The majority of market-available programs have external controls.

Installer's manual

There are differences between various types of led linear wall wash lighting, but for the high voltage input type (110V or 220V input), only 110V or 220V is required to connect the light fixture. But you'll need to have a backup power source ready for the low voltage DC12V 24V wall wash lights.

Application

The high-power LED wall washer has an irradiation distance of 10-1 meters, making it ideal for panoramic floodlighting of internal and external walls, including those of buildings, government lighting projects, businesses, subways, elevated overpasses, and architectural landmarks. outdoor plazas and landscaped structures. coloring of exhibits, walls, and landscape-related things. capable of adjusting to a range of indoor and outdoor temperature and humidity conditions. Red, yellow, white, green, blue, and other effects are among the colors.

Wall Washer Fixture

Feature:

● BENWEI's wall washer fixture are perfect for interior or exterior wall wash applications and are easily concealed due to their compact size.
● These wall wash fixtures are the choice of electricians, lighting designers and architects worldwide for their high performance light output, attractive styling, and accurate colors.
● Available in a variety of colors, as well as RGB (up to 16.7M colors).
● The RGB version of this wall washer is capable of producing 16.7 million colors and features 31 built-in color changing programs. Or, it can be controlled via a DMX decoder/driver.
● RoHS Compliant

Specification: