It's not very difficult for anybody who wants to install a solar or wind LED street light themselves to do so.
Step 1: Dig the installation hole
After you've chosen the location for your solar or wind-powered LED street light, check sure the hole has been dug out appropriately.
So how would you go about it? There are really two methods for excavating the hole.
1. If you use the excavator, it will only take you two to three minutes to complete the task.
2. The second alternative is to physically dig the hole with a shovel, which would take an hour to accomplish with only one guy working on it.
Install solar LED lighting now How long does it take to install a solar or wind-powered street light?
Make the concrete foundation kits in step two.
Since a solid foundation must be laid in order to support the street pole firmly, cement is required for this operation.
One individual may do this task in around 20 minutes.
Install solar LED lighting now 33 - How long does it take to install a solar or wind-powered light?
Create the wire connections in step three.
Making sure that all of the cables with the lights and batteries are connected correctly requires focus for this process. If you’re doing it alone it will take your 20 minutes.
Attach the pole to the foundation kits in step four.
Fixing the pole in the foundation that you worked so hard for is the last step in installing a solar or wind-powered LED street light.
In order to avoid having to redo anything, try to precisely repair the solar or wind-powered streetlight.
If a crane and two guys are used, the operation takes between five and seven minutes. On the other hand, doing it by hand will take about 15 to 20 minutes. In addition, you will want at least four to five guys to assist you in correctly installing it.
In other words, if everything is done correctly and step-by-step, the installation won't take more than two hours.
