Introduction
LED recessed downlights both lighting and decorative two functions, using recessed installation, can ensure the ceiling unity and perfection.
Recessed downlights do not take up space in the home, but can increase the soft atmosphere of the space. So do you know how to install LED recessed downlights? What are the precautions for installing LED downlights?
Next, we will talk about how to install LED recessed lights and their installation considerations.
How to install LED recessed downlights?
1. Cut out hole:
Determine the size of the recessed downlight, and the size of the hole that needs to be cut in the ceiling, and then cut out the corresponding size of the mounting hole in the ceiling. (note that the hole generally cut out should be slightly larger than the size of the recessed downlight)
2. Wiring:
Before embedding the LED recessed downlight into the hole in the ceiling, you need to connect the wires inside the downlight first.
Generally, there are two wires inside the recessed downlight, zero wire, and firewire, remember not to connect the wrong wire. Connect the firewire reserved in the hole with the firewire that comes with the downlight, and connect the zero wire with the zero wire.
At this time also need to pay attention to the wiring must ensure that the power is off, otherwise, there will be a risk of electric shock. When the wire is connected, in order to avoid the use of leakage, it is best to use insulating tape for winding. In addition, the power supply will be turned on to confirm that the wire contact is good.
3. Recessed installation:
After connecting the power cord, put the spring clips on both sides of the embedded downlight vertically into the cut-out ceiling holes. The spring clips on both sides of the downlight will be unfolded and stuck on the top of the ceiling to complete the installation.
Installation considerations for recessed downlights
After opening the downlight package, check whether the product is intact and whether there is no damage.
Before installing the product, please read the manual carefully, in addition, before installing the lamps, be sure to cut off the power.
When installing, make sure that there is a 2 cm high clearance on the ceiling being installed. Try to stay away from the wall with heat sources, in addition, wiring is best to separate the wiring.
The connecting wires on the luminaire can be passed through the drilled holes, avoid excessive tension when installing the connecting wires of the luminaire, and do not make the connecting wires knotted.
Summary
LED recessed downlight is a kind of lighting fixture with both lighting and decoration functions, long service life, and good energy-saving effect. It is easy to install, does not take up space, and can be perfectly integrated with the ceiling.
