Since fluorescent tubes were the most economical and energy-efficient lights available in the past, they were the preferred choice for offices, warehouses, and other commercial and industrial spaces. However, as technology advances, people continue to seek out better options.
Then LED technology came along. There are several reasons why LED tube lights are currently becoming more and more popular in the commercial lighting industry (and beyond).
We offer you our guide on installing LED tubes if you are thinking about getting this kind of lighting or have already decided to do so after being persuaded by the numerous advantages of LED lights.
What Are the LED Tube Lights?
LED tubes are very adaptable, inexpensive, and cost-effective. They have better color rendering, are even more economical and energy-efficient (regular T8 LED tubes are 30% more efficient than fluorescent T8 tubes), and are very dependable because they require less maintenance and still burn out less frequently. They also fit into old light fixtures, so replacing your fluorescent tubes with LED ones is easy.
LED tubes may have varied colour temperatures, and they don't flicker like fluorescent lighting. You can install LED lights with dimming capabilities, and it is not as expensive as in the case of other tube kinds. LEDs are also more environmentally-friendly, since they don't contain any mercury.
LED tube lights are classified according to a "T" measurement; the larger the number, the thicker the diameter of the lamp. There are options for T5, T8, and T12 lights. "T" is precisely one-eighth of an inch, and the number that follows indicates how many eighths of an inch broad the light-or, more specifically, its bulb-is. Consequently, a T8 LED light, for instance, is precisely one inch (8/8ths).
With a fluorescent tube, the lower the number, the more efficient the light, but that is not always the case with the LEDs.
A Guide to the LED Tubes Installation
1.Switch off the electricity. It's important. If not, you run the danger of getting electrocuted while working.
2.Take out the old tube. Simply detach all of the cables to complete the task when the power has been cut off. Be careful.
3.Hold the old tube in place. Particularly while working with fluorescent tubes, use caution since they contain levels of mercury, which may be toxic to humans if consumed.
4.Examine the ballast. Electronic or magnetic ballasts are found in all fluorescent tubes; if you hear buzzing or notice flickering, the ballast is magnetic.
5.If the ballast is electronic, remove it. If you leave it there, it might harm your LED lights. All you have to do is unplug the cables, take out the ballast, then reattach the cables. Verify that the connection is tight and that nothing is loose or broken.
6.If the ballast is magnetic, remove it or avoid it. To facilitate installation, many LED tubes come with their own starter. To minimize any risks, it is preferable to contact a specialist if it turns out that you need to avoid the magnetic ballast.
7.Attach the new LED tube. There's no need to hurry while attaching it to the fixture; take your time. Doing everything correctly and taking your time is preferable. The fitting wires must match the live and neutral connections on each LED tube. Rewiring will require an expert if there is a short circuit (both links at one end).
8.Verify that you have followed every step. Make sure everything is connected correctly and that you followed the instructions before proceeding.
9.Activate the electricity. Check to see whether it functions as intended. Although you might be accustomed to the tubes buzzing and flickering, LED tubes shouldn't do that. Repeat each step or contact a professional if you see or hear it.
10.Dispose of the outdated tubes properly. You can't just dump the tube in the trash, especially when it comes to fluorescent lights, which contain mercury. Look for recycling services that handle this type of rubbish in your community. You can dispose of the LED tubes in your usual trash, however recycling is a more environmentally responsible option.
https://www.benweilighting.com/
