If you've invested in a spray proof wall washer light, congratulations! This type of light is perfect for illuminating outdoor spaces, especially in areas subject to wet or rainy conditions. However, proper installation is key to ensuring your new light functions properly and lasts for years to come. Follow these instructions for installing a spray proof wall washer light correctly:
Step 1: Gather your tools and materials
Before you begin, make sure you have the necessary tools on hand. You'll need a drill, drill bits, a hammer, wire connectors, wire nuts, a screwdriver, a ladder, and the light fixture itself. Check your light's installation instructions to see if any additional tools are required.
Step 2: Choose the right location
Selecting the perfect location for your wall washer light is important. You want to place it in an area that receives adequate sunlight during the day so the rechargeable battery has enough power to light up at night. Additionally, the area should be free of obstructions that could block the light's beam.
Step 3: Turn off the power
Before doing any wiring, make sure to turn off the power to the area you'll be working in. This will prevent electrocution and ensure you don't accidentally damage any electrical components.
Step 4: Drill holes
Using a drill and drill bits appropriate for the size of the screws, drill holes in the wall where you wish to mount the light. Insert the screws into the wall with a hammer.
Step 5: Remove the cover
Carefully remove the light's cover to expose the wiring. Follow the installation instructions provided with the light to determine where to make the necessary wire connections.
Step 6: Connect the wires
Connect the wires to the appropriate terminals, using wire connectors and wire nuts as needed. Make sure to wrap the connections with electrical tape to avoid water damage.
Step 7: Secure the light to the wall
Carefully mount the light fixture onto the screws. Use a screwdriver to tighten the screws and ensure the light is securely fastened to the wall.
Step 8: Turn on the power
After you have completed the installation, turn the power back on to the area and test the light to ensure it functions properly.
By following these steps, you can ensure a smooth and proper installation of your spray proof wall washer light. A well-installed light will give you ample illumination for years to come and will contribute to a beautiful outdoor space.
