Wall washer lights are the ultimate solution for outdoor lighting. They enhance the appearance by highlighting the texture and unique patterns of the walls. However, choosing wall washer lights can be challenging as there are different technologies and variations for lighting walls. Therefore, based on my years of experience, I will guide you in selecting the best wall washer lights for your lighting project.
A wall washing light: what is it?
One kind of lighting apparatus used to illuminate big regions of vertical surfaces is a wall washing light. These lights draw attention to special items or textures and give the walls a water-washed appearance.
Additionally, wall washing lights add significance and appeal to the space. These kinds of lighting can be found at building entrances, art galleries, and museums.
LED wall washer light types
Rigid and flexible LED wall washer lights are the two primary types into which LED wall washer lights may be separated according to their structural characteristics. Let's take a closer look at these two kinds of wall washer lights:
LED wall washer light that is rigid：
Projector lights are another name for rigid LED wall washer lights. These wall washer lights belong to the classic or traditional category. These wall washer lights produce the illusion of cleaning the wall by installing tiny LED lights in long, durable aluminium strips. They cannot be formed flexibly, though, because they are quite inflexible.
LED wall washer light that is flexible：
The newest kind of wall washing lighting is the flexible LED wall washer light. Because of its extreme flexibility, they may be curved, bent, and used both indoors and outdoors. As a result, you can light the walls with these lights without being concerned about jagged edges. The flexible LED wall washer lights also available in a variety of colours and are waterproof. They can be securely attached to the wall thanks to the strong adhesive tape on their backs. As a result, installing these bending wall washer lights on curved surfaces is appropriate.
How are LED wall wash lights installed?
It's time to install LED wall wash lights after selecting and acquiring them. To install LED cleaners as quickly as possible, follow these four easy procedures.
Make sure everyone is safe.
Make sure everything is safe before you install the wall washing lights. Please wear rubber shoes and gloves to prevent electric shock while doing this.
Take a measurement of the illumination area.
The installation area must then be measured and marked using tape. Now take care of the wiring that runs from the power source to the lighting.
Setting Up and Connecting
Drilling holes in the tape-marked places is the next step after finishing the wire. To establish the wall washer light's base, drill holes that are half an inch in diameter using a drilling machine. After screwing them into the wall, place the lamp inside. Run the cables through the lamp now. Connect the cords to the power source once the LED wall washer light has been installed.
Last examination
Check to see if the wall washing light is on after turning on the switch. If not, kindly check the wiring and turn off the power source before reconnecting.
Therefore, installing the LED wall washer light is easy if you follow these easy procedures.
