POOL LIGHT SAFETY TIPS
A pool's surrounding lighting is a crucial safety component. We must illuminate the pool's outlines, the pool deck and patio, as well as any stairs and walkways, if we swim at night. Lights are absolutely not an exception to the rule that all electrical components used near water must be properly grounded. Despite the fact that using pool lighting is typically safe, it must always be installed and maintained by a qualified, licenced electrician.
Since it is submerged and directly connected to the household current, the light in the pool itself poses the greatest risk. An underwater pool light must therefore be produced in accordance with specifications, without flaws, and connected by an electrician in accordance with the law. It is completely safe to use a watertight enclosure with suitable gaskets in a grounded niche powered by a functional GFCI breaker. In the event that water comes in contact with any electrical component, ground fault circuit interrupters, or GFCIs, immediately off the power. The junction box or electrical outlet needs to be at least three feet from the lamp and at least 18 inches above the waterline. The connection box or outlet needs to be both childproof and waterproof.
Wearing parts that could leak or crack, incorrect installation, bad wiring, and insufficient grounding precautions are the potential dangers. Underwater lights can gradually stop working over time from continual contact with chemicals and water. Gaskets, electrical wires, and metal parts of a light will eventually deteriorate after a few decades. As a result, it is crucial to regularly check your pool lighting, especially if your pool is older.
Never alter a pool light or any of its components. Never cut, patch, or splice the power cords. Use the manufacturer's recommended replacement and reseal with a new gasket when changing a bulb. Call a certified electrician or a pool repair firm if you are unclear of the age or condition of your underwater pool light or if you don't know how to replace the bulb safely. Engineers have devoted decades of knowledge to creating the safest underwater illumination conceivable. The threat usually results from improper installation or service, or from a failure to maintain the equipment.
Contact the specialists at BENWEI if you have any questions concerning your pool lighting.
Features:
● Epoxy Resin Filled -100% Waterproof ;
● Super Slim-only 7.5mm(0.3inch) thickness;
● 316SS surface ring-No rusty for salty water ;
● Easy Installation- Just fix two screws on the wall;
● 110/120/160/230/280mm different size for choose;
● Control by Remote,Swithch or DMX512 etc... ;
● Support small batch logo customization.
Specification:
| Product Name | RGB Swimming Pool Lights |
| Consumption(watt) | 6W-45W |
| Input Voltage(V) | DC12V/AC12V |
| IP Rating | IP68, IP68 Waterproof |
| Light Color | RGB,Single Color(2700-6500K) |
| Certification | CE, EMC, RoHS |
