Pool lighting: tips and inspiration

Who doesn't wish they had a pool in their backyard? Many individuals would go to any lengths to fulfill this ambition. Do you count among them? Are you soon going to construct your own swimming pool? The lighting should then be given some thought. You can enjoy your new aquatic haven even more with the correct pool lighting.

The use of pool lights for nighttime swimming is evident. You can swim your laps thanks to this, even at night. A swimming pool that is lit is also a fantastic eye-catcher. It adds to the atmosphere in your garden. Be prepared for envious glances from your neighbors, friends, and family...

Please be aware that installing pool lights carries some risk. Therefore, we advise hiring an expert to complete this task.

The lighting in the pool

Security first! When purchasing pool lighting, pay close attention to the IP value. You can determine the degree of protection against liquids and dirt by looking at these two figures. Underwater lighting must always have an IP value of 68, the maximum feasible grade, for safety reasons.

In our shop, every underwater light has an IP value of 68. As a result, you can choose with confidence.

There are two categories in our selection: recessed and surface-mounted spots. In ponds, surface-mounted spots are frequently employed. We advise using recessed locations around swimming pools. Injuries can be prevented by smoothly integrating these into the pool's walls.

RGB LED spots are a good option to think about when purchasing pool lighting. RGB can bring value even if you're not a fan of colored lighting. The natural color of the water and the wall covering will be emphasized by giving the spots a light blue tinge. Of course, you can always go with a bolder hue like red, purple, green, or yellow.

Without a sure, our online store has a place for you. But how many ought you to purchase? Because the water works as a reflection, pool lighting should be kept to a minimum. The entire pool can be illuminated by a few spots. A good benchmark is one spot every three to four meters. Typically, underwater illumination is only installed halfway down the pool's length.

illumination surrounding the pool

When we think of pool lighting, the underwater lights in the pool's walls come to mind immediately. However, most swimming pools are bordered by vegetation, artwork, or sun terraces. Lighting can also be installed in this area.

To emphasize your swimming pool's curves, use ground spots or garden poles. Indirect illumination (provided by a waterproof LED strip) can be used to emphasize height differences if the patio or swimming pool is higher than the surrounding area.

Do you have a unique plant or water feature near the pool? This can be highlighted with a pin with a spot on. The majority of these locations have heads that are movable, making it simple to aim in the proper direction.

Another piece of advice is that it would be convenient to link the garden lights and the pool lighting, perhaps using home automation. This makes adjusting the illumination a lot simpler. There are also a ton of other features, such pool lights that switch off automatically when the pool cover is opened.

Do you require counsel?

Do you require any suggestions for lighting your garden or pool? Our professionals will be happy to assist you. Do not be reluctant to get in touch with them.
 

36W Swimming Pool Light

Features:

● High brightness LED lamp beads.
● Waterproof design for long term use.
● Used for both fresh or salt water pool.
● Easy to install, come with standard fittings.
● With bottom line connection, safe and reliable.
● Widely used in swimming pools, water parks, aquarium, etc.

Specification: