Are the fluorescent lights in your store still in use?
If so, you are not by yourself. In many workshops around the nation, fluorescent lighting is used. Having said that, it's definitely time to reexamine and think about converting to LED lighting.
Do you think fluorescent lighting is any good? Do you have to strain your eyes when working, or can you do it comfortably? Are dark places well-lit by these lights? Are you tired of lights that flicker? How often are defective fluorescent tubes or ballasts replaced? And when you do, do you go out of your way to make sure the fluorescent lights are disposed of properly?
If you have any of these typical problems, installing LED lighting in your workplace would be ideal.
Here are six reasons why switching from fluorescent to LED store lighting is a wise choice.
Lighting costs may be cut by 50% using LED lights.
Even if certain other types of bulbs utilize energy more effectively than fluorescents do, they still fall short of LEDs in this regard. This is due to the fact that upgrading to LED lights may reduce your monthly lighting expenditure by up to 50%.
LED Lighting Reduces Maintenance Fees
Fluorescent tubes typically last between 7,000 and 15,000 hours. Not all of these hours, nevertheless, are applicable. As you utilize fluorescent light, the quality of the light decreases. A fluorescent light's effectiveness isn't guaranteed just because it turns on. Generally speaking, a fluorescent light's output starts to noticeably decrease at around halfway through its lifespan. You must replace fluorescent light tubes rather regularly because of this.
LEDs, in contrast, don't go through this type of loss in light output. L70, which essentially measures how long it takes an LED light bulb to achieve 70% of its initial lumen output, is the unit used to assess the brightness of LED lights. An L70 time of 50,000 to 100,000 hours is typical for LED lights.
Even if we accept the lesser estimate (50,000 hours), you will have burned up four fluorescent lights by the time an LED light bulb reaches its L70 threshold. Additionally, one LED light would survive as long as six fluorescents if you opt to discard fluorescent tubes when they are no longer useful rather than when they cease functioning physically.
In summary, utilize LEDs to save maintenance expenses.
LED Lighting Is Stable.
Fluorescent lights frequently have flickering issues. LEDs typically don't flicker since they employ a unique LED driver to convert AC current to DC current. And when they do, the LED light is almost never at fault. LED lights typically flicker due to a bad driver or bad wiring.
LED Lighting Is Mercury-Free
Did you know that mercury is used in fluorescent lighting? Fluorescent lamps must be disposed of properly since mercury is carcinogenic. They cannot be thrown away with other trash in your trash container. Additionally, a fluorescent tube's glass construction and mercury content might both contribute to its potential for difficulties if it were to break.
On the other hand, LEDs are neither constructed of glass nor do they contain mercury. As a result, you can readily dispose of them and are not concerned about any potential danger if they break.
LED Lighting Can Be Dimmed
You may quickly and simply create a wonderful working atmosphere with the aid of dimmable lights. Dimming lights makes sense if a particular work area is excessively bright or if your lights are equipped with occupancy or motion sensors.
Most fluorescent lighting cannot be dimmed. Those that are cost more and call for an expensive, specialized ballast. In other words, you will have to pay significantly more money than you would on regular fluorescent lights if you want the dimming option in fluorescent lights.
However, the majority of LED lamps can be dimmed.
Motion sensors and LEDs Coexist Without Problems
Installing a motion or occupancy sensor is a sensible method to reduce your lighting expenses. This will guarantee that the lights in your workshop are turned on when people are there and off when they are not. However, fluorescent lights' longevity is impacted by the addition of occupancy sensors. With LED lights, though, that's not the case.
A Conclusion
Compared to fluorescent tubes, LED lights provide a number of benefits. Switch to LED light bulbs if you are still using incandescent bulbs in your workshop to save money on your lighting bulb, lower maintenance expenses, eliminate flickering, and boost productivity.
