The subject of how to maintain an LED explosion-proof light for a long service life should always be taken into consideration after choosing and acquiring one.
1. To ensure the LED explosion-proof light is functioning properly, frequently check the grounding.
2. Avoid installing windscreen devices and the like in humid environments to prolong the service life of LED explosion-proof lamps, since doing so has a significant negative impact.
3. Frequently dust the outside of the lamp and wipe it down with a dry towel to improve light output and heat dissipation; a damp cloth should not be used. Before cleaning, it is advisable to turn off the electricity.
4. To sustain the protective performance of the shell in a damp environment, it should be maintained promptly by replacing the sealing components if there are puddles in the light.
5. If a light source is broken, it should be shut off immediately to prevent the light source from putting an electrical component, like the ballast, in an abnormal state.
6. The explosion-proof should have a thin layer of replacement anti-rust oil applied to its surface. It should also be checked to see if the sealing circle is functioning when the lid is closed.
7 .If these issues are found, the cover should be opened and examined to see if the composite surface of the explosion-proof combination is intact, if the rubber seal has hardened or grown sticky, causing the wire insulation to turn green and carbonised, and if the insulation and electrical component have been deformed. It must be quickly fixed and replaced.
8. Examine the visible components to see whether there are any signs of foreign object impact, a loosening protective network, corrosion, etc. If so, discontinue using and promptly fix or replace.
9. The LED explosion-proof lamp's sea section should not be disassembled or opened.
