What’s the difference between 365nm and 395nm UV curing LED light？

UV curing LED lamps are widely used in industries such as adhesive curing, ink printing, PCB circuitry, nail art, and jewelry testing. The mainstream types on the market are 365nm and 395nm wavelengths. Many buyers only look at the power output and don't understand the characteristics of the two types of UV light. Choosing the wrong wavelength can lead to problems such as incomplete curing, material yellowing, and insufficient penetration. This article clearly compares the core differences between 365nm and 395nm UV curing lamps, explaining their suitable industries and helping you choose the right model.

365nm: Short-wave UV, higher energy density, more concentrated light wave, extremely faint visible light to the naked eye, almost no noticeable purple light. Higher chip manufacturing cost, higher price than 395nm lamps with the same power output.

395nm: Long-wave UV, weaker energy, strong purple light visible to the naked eye. Mature chip technology, low price, more readily available in the market.

365nm: High energy, excellent deep curing ability; thick UV adhesives, dark inks, and high-opacity coatings can be completely dried, with minimal surface stickiness and no risk of sticky finished products.

395nm: Low energy, only suitable for thin-layer transparent UV adhesives; thick adhesives and dark inks tend to dry only on the surface, leaving the interior uncured, leading to potential cracking and peeling later.

Visible Light: 395nm ultraviolet light is glaring and can irritate the eyes with prolonged use; 365nm visible light is weak and provides a softer visual experience.

Material Aging: 395nm long-wave ultraviolet light can easily cause plastic and resin workpieces to yellow and become brittle; 365nm causes less damage to the substrate and is less prone to aging and discoloration.

PCB circuit curing, industrial precision adhesives, black ink printing, optical lens bonding, electronic component packaging, and high-end craft epoxy resin application.

Nail UV gel, small transparent epoxy resins, UV wall coatings, simple label printing, fluorescence detection, and general DIY crafts.

365nm UV LEDs have high energy and strong penetration, suitable for high-precision industrial curing of thick, dark materials, resulting in better finished product stability. 395nm LEDs are low-cost but emit strong UV light, suitable only for shallow transparent UV adhesives and consumer DIY applications. 365nm is preferred for industrial mass production and projects requiring high bonding strength; 395nm is a good option for nail art and small-scale, low-cost craft processing.

Unsure whether to choose a 365nm or 395nm curing lamp for your UV adhesive thickness and material? We can customize UV LED equipment with matching power based on your production line size and curing speed requirements, and provide free wavelength selection advice. Welcome to contact us for solutions and quotes!

Integrated LED T8 UV tube Lighting