Which LED Panel Light Fits Your Space?

An upscale indoor lighting fixture is an LED panel light. A uniform plane bright effect is created when light travels through the light guide plate with high transmittance. These lights can be readily placed on a variety of surfaces by matching various accessories (clips, surface-attached frame, or steel ropes), which makes them appropriate for a variety of applications.

led surface mounted panel light

For edge-emitting panel lights, the light guide plate is crucial. It directs light through the light-transmitting plate by refracting it from parallel to perpendicular. Light is directed to the rear of the panel light by reflection through a reflective paper. Dot design and plate selection (transmittance), often PMMA, MAS, or PS, with various costs, determine efficiency.
Long-term use will cause PS and MAS to turn yellow. MAS will likely last three years, whereas PS will likely last two. It also relies on the local climate. In general, hotter locations will produce it. There will be less fading time. PMMA light guide plates are essentially utilised if you desire a 5-year warranty or greater light efficiency. Many factories employ light guide plates that are typically between 1.6 and 3.0 mm in size; the thicker the plate, the more expensive it is.

The diffuser plate's job is to distribute the light from the light guide plate uniformly. It can also be used to blur the dots. The primary materials utilised include acrylic, PS (polystyrene plastic), PP (polypropylene plastic), PC (polycarbonate plastic), etc. PS and PP are more frequently utilised, and prices range from high to low.
Acrylic has a light transmittance of 92%, PC is 88%, and PS is roughly 80%. Although it is less aging-resistant, acrylic has greater light transmittance and is more reasonably priced. PC has superior anti-aging qualities but is more expensive in comparison. Manufacturers differ in the thickness of their diffuser plates; traditional options are more expensive and fall between 0.8 and 1.2 mm. Compared to side light-emitting panel lights, direct light-emitting panel lights require a higher diffuser intensity, which frequently necessitates a thicker design.

To increase light efficiency, reflect the remaining light onto the back of the light guide plate (usually RW250).

The iron rear panel is the most widely used; its strength, weight, and thickness vary. In contrast to the side-emitting panel light, the direct-lit panel light has a different design, a thicker rear cover, and a direct-type back cover that will be spray-coated and coloured for improved reflection.

The brand, voltage, isolation (isolation is safer), non-isolation, stroboscopic (it will affect whether the light of the lamp is stroboscopic when taking pictures under the mobile phone), functional requirements (like dimming and colour grading), and certification requirements will all affect the quality and cost of the LED panel light power supply.

This panel light uses a novel side-emitting optical structure, with the LED light source positioned along the panel's edge. It produces 360° omnidirectional uniform light output when combined with reflective paper and a nano light guide plate, removing dark areas and guaranteeing constant brightness throughout the whole lighting area.

It has high-end SMD2835 LED chips, which have the following features:
High luminous efficacy for energy-efficient, brilliant lighting
Low heat production to prolong life and lessen thermal stress
Consistent light output with less light fading over time
Superior colour rendering index (CRI) helps bring back vibrant, authentic colours

Reflective paper: Reduces light loss and increases efficiency by reflecting stray light back into the light guide plate.
The nano light guide plate is precisely designed to disperse light throughout the screen, guaranteeing consistent brightness free of hotspots.
Soft light diffusion panels protect eyesight and provide comfortable illumination for extended periods of time by diffusing light into a soft, glare-free glow.

Together with the low-heat 2835 LEDs, the lamp body's vented design and sturdy back cover create an efficient thermal management system. This keeps operating temperatures steady, avoids overheating, and greatly extends the LED components' service life.

The panel light is perfect for retrofitting or new construction because it can be installed surface-mounted (no ceiling cutouts) and comes in both round and square configurations. The sleek, contemporary appearance provides strong, consistent lighting while blending in perfectly with a variety of interior design styles.

CE Certification: Ensures safe operation and interoperability throughout European nations by meeting the fundamental health, safety, and environmental protection requirements of the EU market.
RoHS Certification: Ensures that the product is environmentally safe for both users and the environment by limiting the use of hazardous compounds (including lead, mercury, and cadmium) in accordance with EU RoHS laws.

1. Residential Spaces: Ideal for living rooms, kitchens, balconies, hallways, and bedrooms. For everyday living and leisure, the 360° soft light creates a warm, welcoming environment.

2. Commercial Settings: Perfect for hotels, hospitals, schools, workplaces, meeting spaces, and retail establishments. The consistent, glare-free light increases visibility, boosts output, and fosters a professional atmosphere.

3. Public Areas: Ideal for waiting areas, retail centers, hallways, and stairwells. It is an affordable, low-maintenance lighting option for high-traffic areas because of its long lifespan and energy-efficient design.

4. Decorative Lighting: In addition to providing practical illumination, the sleek, contemporary circular shape adds a touch of elegance to homes, workplaces, and public areas.

Our firm prides itself on owning its own factory, guaranteeing complete control over the production process and the quality of our goods. We are not only agents; we are manufacturers committed to offering our clients the most competitive rates available. We invite consumers to evaluate our samples first, as we are assured that the quality and pricing of our items are self-evident. Our dedication to excellence and client satisfaction compels us to consistently perform at our best and provide superior quality products.

Our address

3rd Floor, 5th Building, Hebei Industrial Park, Hualian Community, Longhua District, Shenzhen, China

Phone Number

86-19308489145

E-mail

bwzm09@ledbenweilighting.com