comparison of product parameters
| Input Voltage(V) | AC100-265V | Light Source | LED |
| IP Rating | IP65 | Lamp Luminous Efficiency(lm/w) | 100-110lm/w |
| Lifespan (Hours) | 30000 | Lamp Body Material | Aluminum+ tempered glass |
| Color Temperature(CCT) | 5500-6500K | Support Dimmer | No |
| Base Type | Other | Color Rendering Index(Ra) | 80 |
| Warranty(Year) | 3/5-Year | Lighting solutions service |
Lighting And Circuitry Design, Dialux Evo Layout, Auto Cad Layout |
| Working Temperature(℃) | -40 - 50 | Place of Origin | Guangdong, China |
| Brand Name | Benwei | Product Name | Led Explosion Proof Flood Light |
| Power | 50W/100W/150W/200W/240W/300W | Color Emerature | 5500-6500K |
| Material | Aluminum+ tempered glass | LED chip | SMD2835/3030 |
| Lamp Luminous Efficiency(lm/w) |
100-110lm/w |
Voltage | AC100-265V |
| IP Grade | IP65 | Ra | 80 |
Core Optical Performance & Light Source
Adopts high-efficiency SMD2835 / SMD3030 high-brightness LED beads with single-chip luminous flux up to 110-130lm/W, ultra-high luminous efficiency for bright, uniform wide-area flood lighting without dark zones or glaring hotspots.
Precision optical lens distribution design achieves wide beam angle, covering large working areas with consistent light output to reduce supplementary lamp investment for industrial sites.
Low color temperature drift performance, maintains stable color rendering index (CRI>80) during long continuous operation, clearly distinguishes equipment, pipelines and safety warning signs in hazardous workshops.
Constant current isolated driver built-in, anti-surge voltage protection against grid fluctuation, avoids flicker and strobing light that causes visual fatigue for long-shift workers.
No infrared & ultraviolet radiation inside light output, prevents aging, discoloration and deterioration of chemical raw materials, coatings and flammable stored goods near lighting fixtures.
Lifespan & Light Attenuation Loss Performance
Theoretical service lifespan of LED light source reaches 50,000 working hours, 5x longer than traditional metal halide explosion-proof lamps and 8x longer than halogen explosion lights, slashing frequent lamp replacement labor & procurement costs.
Optimized thermal conduction structure controls junction temperature of LED chips under 75°C under full load operation, fundamentally slowing light decay speed.
Ultra-low light loss curve: only 5% lumen depreciation after 10,000 hours of continuous operation; ≤18% total light attenuation after 30,000 hours working time; retains over 78% initial brightness at end of full 50,000-hour service cycle.
Die-cast aluminum cavity fully isolates drive power supply from LED light board, heat generated by driver will not accelerate chip aging, dual protection to extend overall fixture service life.
Customizable 3-year full unit warranty configuration available upon request, long-term stable performance guaranteed without extra maintenance expense within warranty period.
Solid-state light source with no fragile filament structure, anti-vibration and anti-shock, avoids premature burnout caused by construction site vibration, vehicle bumping or pipeline shaking.
Wide Application Scenarios & Safety Value
Specially designed for Zone 1, Zone 2 gas hazardous locations and Zone 21, Zone 22 combustible dust hazardous industrial areas.
Widely applicable to oil refineries, chemical processing plants, gas stations, coal mine tunnels, grain silos, paint workshops, pharmaceutical factories, oil depots and outdoor hazardous construction yards.
Low power consumption design reduces overall plant electrical load, cuts long-term electricity expenditure compared with old explosion-proof lighting solutions.
Full safety compliance with international industrial explosion-proof lighting standards, eliminates hidden fire & explosion risks brought by ordinary flood lights in flammable working environments.
All-weather outdoor adaptability, stable normal operation under extreme temperature range (-30°C ~ +55°C), suitable for high-temperature factory workshops and low-temperature open-air mine yards.
How To Cooperate With Us?
Having its own factory gives our firm complete control over the production process and the quality of our goods, which we take great pride in. We are manufacturers, not only brokers, committed to offering our clients the lowest costs. We invite consumers to evaluate our samples first since we are certain that the cost and quality of our items are evident. Our dedication to excellence and client happiness motivates us to consistently provide superior products.
Our address
3rd Floor, 5th Building, Hebei Industrial Park, Hualian Community, Longhua District, Shenzhen, China
