130LM/W Led Exterior Flood Light

Core Optical & Luminous Performance

1. Equipped with authentic Philips SMD2835 high CRI LED chips, two-color chip uniform layout inside the light board, stable luminous output without color shift after long-time operation.

2. Industry-leading 150lm/W ultra-high luminous efficiency, far exceeding conventional floodlights, achieves brighter field illumination with lower power consumption, greatly cutting down clients' long-term electricity expense.

3. High color rendering index Ra＞80, R9＞0; restores true color of objects, perfectly meets the strict lighting demand of sports courts, commercial plazas and landscape facades.

4. 3-mode CCT switchable design integrated on the lamp body, supporting Cold White (5000K–6500K), Neutral White (4000K–4500K), Warm White (2700K–3500K). Clients can adjust light tone on-site without extra dimmer equipment, matching different application scenarios flexibly.

5. Uniform light distribution without central over-bright hot spot or edge dark zone; wide beam angle covers large-area ground evenly, eliminates glare & visual fatigue for long-time outdoor activities like tennis matches.

6. Built-in sensitive photocell sensor as standard configuration: auto turn on at dusk when ambient light weakens, auto shut off at dawn with strong daylight, realizes unattended intelligent lighting and further reduces energy waste.

Service Lifespan & Light Attenuation Control

1. Ultra-low light decay technology: professional constant current driver matched with high-quality LED chips, suppresses chip luminous attenuation effectively. Only less than 10% lumen depreciation after 50,000 hours of continuous working, far better than ordinary cheap floodlights with over 30% light loss within 1 year.

2. Large-area integrated die-cast aluminum heat sink with dense fin structure + dedicated breathing vent respirator balance system: accelerates internal heat convection, rapidly export heat generated by LED chips. Keep chip working temperature within safe range all the time, avoid light failure, yellowing or burnout caused by overheating.

3. Strict aging test before factory delivery: every lamp undergoes 72-hour uninterrupted lighting aging, screens out defective chips & unstable drivers to guarantee consistent long-term performance.

4. Rated average service lifespan reaches 50,000 working hours; under normal daily 8–10 hours usage, the lamp can stably serve over 13 years, drastically lowering clients' maintenance & replacement labor and material cost.

5. Separated heat conduction & light source structure: heat will not transfer to the tempered glass panel, preventing lens yellowing, atomization and light transmittance decline in long-term outdoor exposure.

Full Outdoor Protection Grade & Durability

1. Whole lamp reaches IP65 international waterproof & dustproof protection rating: fully sealed internal cavity structure, effectively block rainwater, fog, dust, sand and fine particles from penetrating into the light body. It works steadily in rainy, snowy, foggy, coastal high-humidity salt spray environments without short circuit.

2. Front cover adopts high-strength explosion-proof tempered glass mask: high hardness, compression resistance, crack-proof, high temperature resistance and impact resistance. It can withstand accidental hard object collision, hail impact and extreme temperature difference between summer & winter, no breakage risk in outdoor open-air installation.

3. Anti-corrosion surface treatment on aluminum housing: electrostatic spraying layer resists oxidation, acid rain corrosion and UV aging, the lamp shell will not fade, peel or rust after years of outdoor sunlight exposure.

4. All wiring interfaces are equipped with rubber waterproof gaskets, matching sealed cable glands to prevent water seepage from wire entry point, eliminate hidden danger of electric leakage in rainy weather.

5. Wide operating temperature range: stable operation between -35℃ ~ +60℃, adaptable to severe cold northern winter and high-temperature southern summer regions globally.