comparison of product parameters
| Input Voltage(V) | 220-240 | IP Rating | IP65 |
| Lamp Luminous Efficiency(lm/w) | 90 | Application | Hotel |
| Certification | CE | Lifespan (Hours) | 30000 |
| Warranty(Year) | 2-Year | Color Temperature(CCT) | 3000k |
| Color Rendering Index(Ra) | 80 | Installation | Wall Mount |
| Support Dimmer | No | Material | Aluminum |
| Lighting solutions service | Lighting And Circuitry Design | Special Feature | Lightweight |
| Light Source | LED | Led chip | SMD |
| Beam Angle(°) | 120 | Lamp Luminous Flux(lm) | 1800 |
| Place of Origin | China | Brand Name | Benwei |
| Working Temperature(℃) | -25 - 55 | PF | >0.9 |
| Input Voltage | 220-240V | Power | 20W |
Heat Dissipation & Durable Hardware Structure
Wavy die-cast aluminum integrated heat sink, large radiating contact area, multi-directional natural air circulation design, accelerates heat exchange and prevents heat accumulation inside the lamp body.
Thickened one-piece cast aluminum frame, high structural rigidity, anti-deformation under high temperature and low temperature climate, no housing warping after years of outdoor use.
180° fully adjustable heavy-duty metal mounting bracket with locking screw, freely adjust irradiation angle up and down, easy to fix on wall, ground, pole and ceiling surfaces.
Anti-loose stainless steel fixing screws, anti-rust and anti-corrosion, bracket won't slip or loosen after long-term wind vibration, stable light irradiation angle without manual readjustment.
Shockproof integral structure, withstands minor impact, vibration and bump during transportation, installation and construction site use, not easy to damage internal optical components.
Service Life & Ultra-Low Luminous Loss Performance
Rated ultra-long service lifespan up to 50,000 hours, 10 times longer service life than traditional halogen lamps, 6 times longer than cheap plastic housing outdoor flood lights.
High-quality anti-lumen-decay SMD2835 chips, lumen depreciation ≤4% after 10,000 hours of continuous daily operation; only ≤12% light attenuation after 30,000 hours working, no obvious brightness fading after years of outdoor use.
Integrated wavy die-cast aluminum heat sink with 3D wave-shaped radiating fins, forms large cross-flow air convection channels to rapidly dissipate heat generated by LED chips, lowers core operating temperature by 20℃+ compared with flat heat sinks.
Efficient heat dissipation system fundamentally slows chip light decay and prevents premature LED bead burnout, drastically reduces product replacement frequency and post-maintenance costs for users and contractors.
Multi-protection intelligent drive built with overheat, overvoltage, short-circuit and surge protection circuits; automatically cuts power supply under abnormal current or high temperature to avoid permanent lamp damage.
Solid-state LED light source without fragile filament, mercury or gas components, shock-resistant structure with extremely low failure rate under long-term outdoor day-night operation.
Long-term stable spectrum output, no wavelength drift, color shifting or partial dead lamp beads common in inferior thin-shell flood lights exposed to wind and rain.
IP65 High Protection Grade & All-Weather Sealing Structure
Official IP65 top outdoor protection rating, dual protection against dust and water: fully blocks all fine dust particles from entering the lamp interior, and withstands powerful high-pressure water jet flushing from any angle.
Full surrounding silicone rubber sealing ring between lamp housing and tempered glass panel, seamless integrated compression sealing technology, zero gap for rainwater, snow, fog or dust penetration.
IP65 waterproof design enables stable operation in heavy rain, snowstorm, humid coastal salt fog and dusty construction site environments, no internal circuit fogging, short-circuit or oxidation failure.
Front panel adopts thickened shatterproof tempered glass, passed hammer impact resistance test, anti-crack and anti-scratch, prevents accidental breakage during installation or outdoor collision.
All internal circuit components are coated with insulated waterproof conformal coating, resistant to mild corrosive moisture and salt air, extends service life in coastal and humid regions.
Die-cast aluminum alloy housing with anti-rust matte coating, anti-oxidation and anti-corrosion, long-term outdoor exposure without rusting, peeling or paint fading.
Closed internal wiring compartment, fully insulated wiring terminals, eliminates electric leakage risk under rainy wet conditions, complies with global outdoor electrical safety standards.
How To Cooperate With Us?
Thanks to our own facilities, we have complete control over the production process and the quality of our goods, which gives us immense delight. We are committed to giving our clients the finest pricing since we are manufacturers rather than just brokers. We invite clients to evaluate our samples first since we are certain that the cost and quality of our items are transparent. Our dedication to excellence and client happiness motivates us to consistently provide superior products.
Our address
3rd Floor, 5th Building, Hebei Industrial Park, Hualian Community, Longhua District, Shenzhen, China
